1965 BMW R69S Standard Dover White

This listing was posted on Carseva.

$8,400

1965 BMW R69S Standard Dover White

Price:

$8,400

Financing:

Pre-Qualify Online & Save

Estimated Shipping:

Click for an estimate from uShip provided by uShip.

Insurance:

Local auto insurance quotes. Search & save now.

Summary:

Used 1965 White

Location:

Memphis, TN

Description:

After disassembly, degreasing and bead blasting, the magneto was serviced with a remagnetized rotor, Emerald Island ignition coil, and new ignition points and condenser. A serviced last version ignition advancer with added ignition advance limiter screw is installed.Replacement Kolbenschmidt pistons were sourced and balanced and the semi-gloss black powdercoated cylinders bored/honed to fit. The bead blasted ¾” sparkplug reach LK cylinder heads underwent rebuild as necessary.German chrome exhaust headers are installed with a stainless steel crossover tube and unseamed German chrome mufflers.In order to improve engine acceleration/deceleration and thereby improve shifting, a Barrington Motor Works aluminum flywheel was installed along with a sprung type 9mm clutch friction disc.New Eurobars were installed. After servicing and refinishing the hand controls and switches, they were installed with new control cables. The hand control levers were professionally polished. Bar end adapters fabricated by Joe Groeger were installed and permitted the installation together of Albert bar end mirrors as well as Hella bar end signals. New Magura hand grips completed the handlebar work.The transmission underwent a complete rebuild including all new FAG bearings as well as new seals and rear cover gasket. The kickstart and foot shift levers were professionally polished. The transmission was filled to spec with BradPenn GL-4 SAE 80/90 gear oil.The vented 25/8 final drive was rebuilt with all new FAG and INA bearings, new seals and gasket. Like the transmission, the swingarm and final drive were filled to spec with BradPenn GL-4 SAE 80/90 gear oil.After rebuilding the wheel hubs with correctly shimmed Timken 30304 tapered roller bearings and modern lip seals the high shoulder aluminum Weinmann rims were straightened and polished and then laced and trued to the hubs with stainless steel spokes by Buchanan Spoke and Rim. New Heidenau 3.50” x 18” K34 tires are installed with Heidenau natural rubber inner tubes and Tesi rim tape after which the tire and wheel assemblies were balanced.A new harness was installed as was a 35W/35W H4 headlight assembly and LED tail light. The VDO 1.2 speedometer, correct for the 25/8 final drive, was rebuilt and retains both the original pre-remanufacture odometer and post-remanufacture trip odometer readings.The larger 6.5 gallon/24.6 liter “Sport Tank” is installed and fitted with a new Karcoma petcock in lieu of an earlier somewhat fussy Everbest petcock. New fabric covered fuel lines are installed with high flow in-line pancake fuel filters.The Bing 1/26/91 and 1/26/92 carburetors were cleaned ultrasonically and rebuilt using Bench Mark Works plastic floats. Barrington Motor Works vacuum fittings were installed to facilitate owner carburetor synchronization. All internal parts were cleaned, evaluated and replaced as needed. A new air filter is installed in the refinished chokeless air cleaner.Because Barrington Motor Works builds reduced maintenance rideable restorations while honoring the past designers and constructors of these vintage motorcycles, high quality stainless steel fasteners with Nylon locking nuts, stainless steel pushrod tubes, stainless steel spokes, and high quality stainless steel axles are fitted. Where necessary and appropriate, certain fasteners and other parts were replated in cadmium.The steering head bearings and all swingarm bearings and seals were replaced after confirming that the frame, forks, and both swingarms were not bent. The frame and other related heavy parts have been professionally powdercoated in 80% gloss custom mixed Dover White matching the Dover White repainted sheetmetal. The sheetmetal has been professionally hand striped.An original BMW OEM hydraulic steering damper was serviced, refinished and installed. An OEM BMW sidestand is installed. Replacement shock eye silent blocks are installed front and rear and all four shock inserts are new.The rear fender is fitted with a luggage rack as well as a replated original iconic “R69S” emblem.“Salt” has completed 294 miles of check out/break-in riding, has already had its initial service and will have a comprehensive 300 mile service after purchase.

Body Type:

Sport Utility

Transmission:

Manual Transmission

Features:

Roof Rack-Luggage Rack, Trip Odometer

Posted:

July 16 2023 on Carseva